DSEPower DSE850

• Deep Sea Electronics DSE850 Multi-Set Communications Hub and Software has been designed to work with the DSEPower Series Load Share Control Modules (DSE55xx and DSE75xx). The software is scheduled to be compatible with additional DSE controllers in the near future.
  The DSE850 Ethernet controller is connected to the internet and all DSE control modules that are on-site. The Ethernet controller requires a fixed internal IP address that can be configured to be visible over the internet (using a third party external router).  Once the IP address can be accessed over the internet then sites can be viewed from any internet connection in the world.
  The system has been designed to display information on a maximum of 16 gen-sets and 4 mains (utilities) or 24 gen-sets with no mains (utilities). The software is easy to set up and DSE controllers can easily be added to the system using the software’s intuitive ‘Add Controller’ page.
  The Ethernet device includes RS232 and RS485 communications ports.  The data taken from the DSE controllers is refreshed every 1-11 seconds (dependent on connection speed).
  
  

  Main Features

  Clear alarms & re-start generators Multiple password levels (Read only, minor changes, full control) ·  Log into system from any web connection (using third party external router) Multi or single set compatible Easy to use graphical interface       System overview screen with instant status indication of gen-sets         Fully detailed controller screens  User configurable data logging       Logs can be downloaded to a local computer for importing data into spreadsheets Alarms with multiple trigger levels RS232 and RS485 communications ports       Common screen layouts for ease of use     E-mail support      Remotely upgradeable firmware       Controller communication log page     Colour engine status indicators – Blue = At rest, Green = Running OK, Grey = Lost contact, Yellow = Warning alarm, Red = Shutdown    Software can display site names on each page for easy identification

  Benefits

  View site status quickly and easily System can send email notification in the event of a change in engine status, engine warning or engine shutdown to a defined email address (using third party external router) Alarms can be cleared and generators re-started (If no site maintenance is required) Software can be used to identify trends in engine behaviour Allows multiple sites to be monitored from one location (Each site needs its own IP address) Full module control Gives information for basic fault finding diagnosis before attending site Can be used on an intranet site for monitoring internally